Send Email
Send SMS
Search
Ashok Industry
Ashok Industry


Degreasing Chemical

Prominent & Leading Manufacturer from Mumbai, we offer asfoclean -310, ektraklin -300 degreasing chemical, stripper -hd and alkaline cleaner for metals and non metals.

Asfoclean -310

REQUEST CALLBACK

Asfoclean -310
Approx. Rs 80 / Kilogram
Get Best Quote

Thanks for Contacting Us.

Product Details:
Grade StandardINDUSTRIAL
Packaging Size10,50 KGS
Packaging TypeBAG
Physical StatePowder
UsageIndustrial

Asfoclean-310 is a coarse granular powder, consisting of a blend of strong alkalies, penetrants and dispersing agents. It was developed for rapid removal of unwanted materials from ferrous metal parts. It penetrates the contaminants, reacts chemically with the metal surface and thereby removing all exterior deposits on the metal surface.


Uses:

Asfoclean-310 when dissolved in water, provides an easy means of removing oils, dirts, carbonaceous products, paints and varnishes from iron and steel. Its main use will be found in the reconditioning, and in the reclaiming of rejected components. Asfoclean-310 can be used on copper and aluminium but with great caution, and only at low concentrations as it may cause excessive attack to the base metal.


Applications:

    • Degreasing :

      It is normally used at concentration of 5 – 10% in water in a hot soak tank preferably fitted with means of agitation. The most rapid results are obtained if the operation is carried out at higher temperature of 60°C - 90°C. In every case we recommend a final rinse in boiling or near boiling water. Compressed air agitation should never be done. Dunking can be done to enhance cleaning.

       

        • Paint Stripping :

          Most wet paints or varnishes are removed by the action of ASFOCLEAN-310. Only experience will dictate the immersion time necessary for any particular paint or varnish. Concentration should be around 30% in hot water.

           

          • Removing Oil & Carbonaceous deposits from condensors & heat exchangers:-

            The articles are immersed in boiling Asfoclean-310 solution. Immersion time may be four hours for particularly tenacious deposits. Concentration of solution will vary from 5 to 20%. Solution may be circulated if required.


            Storage & Handling:

             

            1. Store in a cool dry place

            2. Keep away from Acids


            Safety Precautions:

             

            1. P.V.C. or rubber gloves, shoes & aprons, and if necessary eyeshields should be worn

            2. Any splashes on skin should be washed off with plenty of cold water

            3. If eyes are splashed, wash immediately with plenty of fresh water and then consult physician


            Packings: 10 Kgs. & 50 Kgs.



            Additional Information:

            • Item Code: ASFOCLEAN-310
            Yes! I am Interested

            Ektraklin -300 Degreasing Chemical

            REQUEST CALLBACK

            Ektraklin -300 Degreasing Chemical
            Approx. Rs 230 / Kilogram
            Get Best Quote

            Thanks for Contacting Us.

            Product Details:
            Minimum Order Quantity5 Kilogram
            Grade StandardTechnical Grade
            Packaging Size5,30 KGS
            Packaging TypeCAN
            Physical StateLiquid
            UsageIndustrial

            EKTRAKLIN - 300 is a solvent based heavy duty metal cleaner for use at room temperature. It is extremely effective and economical in use. It can be used for a variety of cleaning applications on any kind of ferrous or non-ferrous metals.

             

            USES ADVANTAGES:-

             

            1. EKTRAKLIN-300 is used to remove oil, grease and other soils from all metal surfaces at room temperature. It can also be used to remove drawing stamping compounds, lubricants, rust preventives, carbon, soot, bitumen, tar, etc.

            2. Being cheap, it can replace costly solvents used in dip cleaning, ultrasonic cleaning and pre-dip prior to vapour degreasing.

            3. It has better cleaning properties and more penetrating power than conventional solvents and thinners.

            4. It is volatile in nature and hence renders the surface absolutely dry immediately after cleaning.

            5. It is a single stage cleaner, thus eliminating post rinsing operations, heating costs and high labour costs involved in most cleaning operations.

            6. It is used for general metal cleaning / degreasing prior to electroplating, phosphating, oxidising, anodising, heat treatment and various surface coating applications.

            7. For cleaning of engine blocks, and other automotive parts during overhaul and maintenance in workshops and service centers.

            8. For cleaning prior to heat treatment and for removal of quenching oil and carbon soot after heat treatment.

            Yes! I am Interested

            Stripper -HD

            REQUEST CALLBACK

            Stripper -HD
            Approx. Rs 80 / Kilogram
            Get Best Quote

            Thanks for Contacting Us.

            Product Details:
            Grade StandardTechnical Grade
            Packaging Size50
            Packaging Typebag
            Physical StatePowder

             

            STRIPPER-HD

             

            (A heavy duty degreaser & paint remover for ferrous metals)

             

             

             

            INTRODUCTION:

             

             

             

            STRIPPER-HD is a coarse granular powder, consisting of a blend of strong alkalies, penetrants and dispersing agents. It was developed for the rapid removal of unwanted materials from ferrous metal parts. It penetrates the contaminants, reacts chemically with the metal surface and thereby removing all exterior deposits on the metal surface.

             

             

             

            USES:

             

             

             

            STRIPPER-HD when dissolved in water, provides an easy means of removing oils, dirts, carbonaceous products, paints and varnishes from iron and steel. Its main use will be found in the reconditioning, and in the reclaiming of rejected components. STRIPPER-HD can be used on copper and aluminium but with great caution, and only at low concentrations as it may cause excessive attack to the base metal.

             

             

             

            APPLICATIONS:

             

             

            1. Degreasing:

               

             

            It is normally used at concentration of 5 – 10% in water in a hot soak tank preferably fitted with means of agitation. The most rapid results are obtained if the operation is carried out at a temperature of 90°C - 95°C. In every case we recommend a final rinse in boiling or near boiling water. Compressed air agitation should never be done. Dunking can be done to enhance cleaning.

             

             

             

            1. Paint Stripping:

               

              Most wet paints or varnishes are removed by the action of STRIPPER-HD. Only experience will dictate the immersion time necessary for any particular paint or varnish. Concentration should be around 30% in hot water.

               

            2. Removing oil & carbonaceous deposits from condensors & heat exchangers:

               

             

            The articles are immersed in boiling STRIPPER-HD solution. Immersion time may be up to four hours for particularly tenacious deposits. Concentration of solution will vary from 1 to 10%. Solution may be circulated if required.

             

             



            Additional Information:

            • Item Code: STRIPPER-HD
            Yes! I am Interested

            Alkaline Cleaner For Metals And Non Metals

            REQUEST CALLBACK

            Alkaline Cleaner For Metals And Non Metals
            Approx. Rs 80 / Kilogram
            Get Best Quote

            Thanks for Contacting Us.

            Product Details:
            Minimum Order Quantity10 Kilogram
            BrandASHOK INUSTRY
            ColorWHITE
            Grade StandardTechnical Grade
            Packaging Size50
            Packaging TypeBAG
            Physical StatePowder

            Asfoclean-B manufactured by Ashok Industry is a white chemical in powder form which is used for removal of oils, soils, lubricants, cutting coolants from various type of metal surfaces. Degreasing chemicals.

             

            A 5% - 10% solution of Asfoclean-B with water is to be prepared in a container and parts/components that are to be cleaned are immersed in this solution. Heating of this solution will accelerate the degreasing process. Asfoclean-B degreaser can be used before plating, zinc phosphating, chromating, galvanizing, etc. It is available in two Packing of 10 kgs and 50 kgs.

             

            Ashok Industry manufactures a wide range of degreasers and cleaners since 1960 and is an ISO 9001-2008 Certified Company.



            Additional Information:

            • Item Code: ASFOCLEAN-B
            • Port of Dispatch: MUMBAI
            Yes! I am Interested

             
            X


            Explore More Products

            Contact via E-mail
            Contact via SMS
            Ashok Industry
            Manisha Kadam (Assistant Manager)
            301, Nestor Court Baji Prabhu Deshpande Marg, Vile Parle West,
            Mumbai - 400056, Maharashtra, India
            Call Us: 
            Call Response Rate: 77%
            Share Us :
            F G T L



            Home  |   Profile   |  What We Offer  |  Site Map  |   Contact Us   |   Mobile Site

            © Ashok Industry. All Rights Reserved (Terms of Use)
            Developed and Managed by IndiaMART InterMESH Limited

            Ashok Industry