Product Price :Get Latest Price
Product Details:Grade Standard | Technical Grade |
Packaging Size | 30 |
Packaging Type | CAN |
Color | LIGHT YELLOE |
Physical State | Liquid |
Usage | Industrial |
Dilution Ratio | 5% |
Dipping Period | 10-15 MINS |
Brand | ASHOK INDUSTRY |
EMULSOIL-PL
(Cleaner and Anti-Rust For Spray Machines)
DESCRIPTION
EMULSOIL-PL is a metal cleaner consisting of surface active agents, emulsifiers, foam suppresents and anti-corrosive additives. It is a clear homogenous liquid which can be used directly or diluted with Water, Kerosene, and Petroleum Solvents. When diluted with water from 1-30% , it gives a stable milky emulsion. It removes greasy residues, oils, dust and soils very effectively. It does not contain alkalies, acids, phenolic compounds or toxic solvents and hence it is extremely safe to use. It is non-dangerous, non-toxic and non-corrosive. It is suitable for ferrous as well as on non-ferrous metals, sheets, parts or components.
USES :
EMULSOIL–PL can be used for cleaning automotive components, engine blocks, castings, aero & diesel engines. It can also be used for cleaning of industrial floors, exterior shells of cars, buses, railway wagons, aircrafts etc. by means of pressurised hoses. It can be used by hand wiping for cleaning furniture, painted surfaces etc.
OPERATING PARAMETERS
PRODUCT | CONCENTRATION | TEMPERATURE | TIME (minutes) | PRESSURE (kg/cm² ) |
EMULSOIL-PL | 2 – 5 % (v/v) 5 – 10% (v/v) | 60°C - 65°C Room Temp. | 1 – 5 " | 2 – 10 5 – 20 |
v/v= Volume by volume
If EMULSOIL-PL is used by hot spray, the components will dry immediately and no further washing or rinsing operation is necessary. However an additional drying stage for quicker drying by a blower or compressed air will extend the protection period. The clean components will be resistant to atmospheric oxidation due to the inclusion of Anti-corrosion additives in EMULSOIL-PL. When used at extremely high spray pressures, the addition of EMULSOIL-PL should be made very gradually to the bath while performing the spray cleaning operation. The concentrations should be raised to the desired level over a period of 2-4 hours of operation. The spray parameters stated above will vary depending on the degree and type of contamination and hence these are approximate guidelines. For superior performance our expert advice may be solicited.
PACKING : 5, 30 & 205 Litres
Explore More Products
Reviewed by 17 Users
Most Relevant Reviews
© Ashok Industry. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited