Approx. Rs 160 / KgGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||40 Kg|
|Packaging Size||40 Kg|
|Solubility||SOLUBLE IN WATER|
SCALGUN SAF LIQUID : Descaling Solution For Solar Water Heater
Water contains various metallic salts in suspension. These metallic salts get accumulated inside pipelines, tubes, etc. in the form of scales over a period of time. These scales must be removed periodically in order to restore the efficiency of system, reduce heating time and attain the required temperature.
Scalgun Saf Liquid (SSL) has been formulated mainly for descaling Solar Water Heating System. It is an inhibited acidic composition containing surface active agents and cleaning agents to effectively dissolve and remove all water scale deposits from Copper, Brass, M.S., S.S. and Aluminium tubes, Pipelines and Vessels. Descaling with SCALGUN SAF LIQUID is safe, simple and economical.
Descaling of Solar Plate Tubes alongwith Storage Tank by Circulation Method:
Prepare a 10% solution of SCALGUN SAF LIQUID (SSL) v/v (volume by volume) with water in a 50 to 100 litres capacity open top circulating tank (To prepare 100 litres of SSL solution – add 10 litres SSL to 90 litres water). Tank must be made of either Plastic, S.S. or FRP/PVC lined M.S. tank
Connect the outlet of this open top circulating tank by a rubber/plastic hose to the inlet of a 1 or 2 HP S.S./Plastic pump. The outlet of pump should be connected by hose to the drain valve of solar plate. Connect the outlet of the storage tank by hose back to the circulating tank
Start the pump and completely fill the system with SSL solution by circulating the same for 3-4 hours preferably at 45°C
Discard SSL solution and then completely flush the system with plenty of water by circulation till the pH of water reaches 6-7
Descaling of Solar Plate Tubes only without Storage Tank by CIRCULATION Method:
Approx. Rs 40 / KgGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||35 Kg|
|Packaging Size||35 kgs.|
|Brand||CONDENSER CLEANER : SCALGUN-WS|
Scalgun-WS is available in standard packing of 35 kgs.
Approx. Rs 80 / LitreGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||40 Litre|
|Quantity Per Pack||40 KGS|
(For Brightening & Passivating of Copper & Brass)
The above product is used as bright dip for finished parts or for cleaning the old tarnished parts of for plating pre-treatments. It does not interfere with welding or soldering operations. The film produced is integral part of the basis metal having unimolecular thickness. It is exceptionally ductile and when coupled with an organic paint film, will give excellent bonding as well as give corrosion protection.
Since CHEMIKLIN-125 is supplied in concentrated form, it is to be diluted with water as 1 part CHEMIKLIN-125 with 2 parts water and the solution should be prepared in the polythene containers, PVC lined mild steel or stoneware. It operates at room temperature and immersion period of the articles in about 2 to 10 minutes depending on the nature of the material being processed. With 1:1 dilution with water, much shorter immersion period is necessary. Because of low temperature operation no fumes or effervesence is developed.
It is essential that before the parts are dipped in CHEMIKLIN-125 bath they should be free from grease, oil, dirt etc. We recommend our ASFOCLEAN-B for this purpose. We supply range of suitable metal cleaners to meet your requirements.
During the working, parts can be loosely wired or placed in plastic or stainless steel baskets according to their shape and size. The baskets should be gently shaken once or twice during the process to enable the solution to reach all surface.
After processing the parts should be rinsed twice in clean running water, warm deionised water or water containing our ASWASOF-MP 25 to 50 ppm at temperature about 120 to 140 F. followed by blowing hot air or centrifugal drying.
Explore More Products