Rust And Corrosion Preventive

Approx. Rs 200 / KgGet Latest Price

Generally Hydrochloric acid is used for pickling of metals. If inhibitor is not added to the acid during pickling, then it will readily attack the base metals causing heavy metal loss and sometimes even causing embrittlement of metals.

Addition of 0.1% to 0.5% of Corobit-1001 to acid pickling bath gives the following advantages :-

1. Reduces metal loss

2. Reduces acid consumption

3. Blistering and embrittlement of metals are minimized

4. Reduces acid fumes

5. Improves quality of pickled products

6. Reduces the quantity of spent liquor to be disposed off and

7. Decreases pickling cost

Ashok Industry is an ISO 9001-2015 Certified Company.

Additional Information:

• Item Code: 1001
• Production Capacity: MORE THAN 1 TON
• Delivery Time: 3-4 DAYS
• Packaging Details: CAN

Approx. Rs 230 / LitreGet Latest Price

ASFOSIL-B15 is a waxy type rust preventive containing rust inhibitors and film forming ingredients. It produces a colourless soft wax like film, giving indoor protection of 12-15 months.

Uses:

It is mainly used as a sealant for machine parts, components and assemblies. It is also used for providing extended protection to phosphatised, blackodised or plated parts. It can also be used for protection of moving components as it has good lubricating properties.

Application :

It is mainly used by dipping method in a M.S. or Plastic container at room temperature with immersion time of 2-5 minutes. It can also be used by spray, brush or swab for larger components. It is to be used directly without any dilution. Parts and components must be completely clean before applying Asfosil-B15.

Removal :

Whenever desired, the film can be easily removed by Kerosene, M.T.O., thinners, etc. by wiping or dipping. It can also be removed in a 10% solution of Stripper-HD or similar alkaline cleaners.

Notes :

• Asfosil-B15

must be used and stored in a well-ventilated area and away from open flames.

• When not in use, the tanks should be kept tightly covered.

• No naked flame permitted in proximity while spraying this product.

Packing : 5 Litres, 30 Litres & 205 Litres.

Additional Information:

• Item Code: ASFOSIL-B15
• Production Capacity: MORE THAN 1 TON
• Delivery Time: 4-5 DAYS
• Packaging Details: CAN & BARREL

Approx. Rs 250 / LitreGet Latest Price

Additional Information:

• Item Code: ASFOSIL-WS
• Production Capacity: 1 TON AT A TIME
• Delivery Time: 3-4 DAYS

Approx. Rs 120 / LitreGet Latest Price

Corobit-410 is available in 6 Kgs and 40 Kgs HDPE Carboys.

Ashok Industry is an ISO 9001-2015 Certified Company.

Additional Information:

• Item Code: 410
• Production Capacity: 1 TON
• Delivery Time: 3-4 DAYS

Approx. Rs 290 / LitreGet Latest Price

ASFOSIL-33 is a solvent deposited resinous based rust preventive fluid, containing rust inhibitors, and organic additives. It produces a dry clear hard film giving indoor protection of 24 months and outdoor protection of up to 12 months. Parts applied with ASFOSIL-33 can be over painted.

USES:

ASFOSIL-33 is used for rust protection of ferrous as well as non-ferrous parts. It is widely used for protection of exterior surfaces of machinery, pipelines and parts where ease of film removal is not a major consideration. One of the major uses is for protection of ferous parts meant for export. Since the film obtained is dry and hard it is not recommended for use on moving machinery parts.

APPLICATION :

ASFOSIL-33 can be applied by dip, spray or brush at room temperature. It is to be used as supplied without dilution. Once applied, it usually dries within ½ hour. Drying should be carried out in open dry and well-ventilated areas. Parts should be handled with care during drying to prevent damage to film. The parts must be absolutely clean prior to application. If thinner film is desired then ASFOSIL-33 can be diluted with ASFOSIL-TH thinner.

REMOVAL :

If desired, ASFOSIL-33 film can be removed by dipping the parts in solvents, such as Xylene, Toluene, Benzene etc.

NOTES :

1. ASFOSIL-33 must be stored and used in a well-ventilated area away from flames.

2. Shelf-life of ASFOSIL-33 in sealed containers is 6 months from date of manufacture.

3. M.S. containers with lids must be used for dipping application. The lids should always be kept tightly closed, when not in use.

PACKING : 5 Litres, 30 Litres & 205 Litres.

Additional Information:

• Item Code: ASFOSIL-33
• Production Capacity: MORE THAN 1 TON
• Delivery Time: 4-5 DAYS
• Packaging Details: HDPE Cans

Approx. Rs 240 / LitreGet Latest Price

ASFOSIL-QD50 is a solvent based rust preventive containing resins, rust inhibitors and organic additives. It produces a transparent hard film coating about 5 micron in thickness and gives indoor protection of about 10 months.

USES :

ASFOSIL-QD50 is used for temporary protection of ferrous and non-ferrous parts. It is generally used for protection of non-moving parts and components.

APPLICATION

ASFOSIL-QD50 can be applied by dip, spray or brush. It is to be used as supplied without any thinning or dilution at room temperature. Once applied, it usually dries within 10 minutes. Drying should be carried out in open dry and well-ventilated areas. Parts should be handled with care during drying to prevent damage to film. Packing of parts should be done only after the film has completely dried.

Note :

Parts should be free from oil, grease, rust, scales, etc. before applying ASFOSIL-QD50.

REMOVAL :

ASFOSIL-QD50 film may be removed with solvents such as Xylene, Toluene, Naphtha etc. or with hot caustic base alkaline cleaners.

NOTES :

• ASFOSIL-QD50

must be stored and used in dry, well-ventilated areas away from open flames.

• Shelf life of ASFOSIL-QD50 in sealed containers is 6 months from date of manufacture.

• Metal containers with lids should be used for dipping applications. The lids and containers should be kept tightly closed when not in use.

• If due to evaporation of solvent, ASFOSIL-QD50 has become viscous, then thinning should be done by adding ASFOSIL-TH.

• Cleaning of spray nozzles, tanks, etc. should be done using xylene, toluene, naphtha or ASFOSIL-TH.

PACKING 5 Lits., 30 Lits. & 205 Lits.

Additional Information:

• Item Code: ASFOSIL-QD50
• Production Capacity: 1 TON AT A TIME
• Delivery Time: 3 - 4 DAYS
• Packaging Details: HDPE Can

Approx. Rs 215 / LitreGet Latest Price

ASFOSIL-GY is a solvent based rust preventive fluid, containing rust inhibitors, and organic additives. It produces a dry light brown film giving indoor protection of 12 months and outdoor protection of upto 6 months and when packed well in indoor conditions the protection period is two years.

Uses:

ASFOSIL-GY is used for rust protection of ferrous as well as non-ferrous parts. It is also applied on chrome or nickel plated M.S. surfaces. It is also widely used for protection of spare-parts and large fabricated components.

Applications:

ASFOSIL-GY can be applied by dip, spray, brush or swab at room temperature. It is to be used as supplied without dilution. Once applied, it usually dries within 1 hour. Drying should be carried out in open dry and well-ventilated areas. Parts should be handled with care during drying to prevent damage to film. The parts must be absolutely clean prior to application.

Removal:

Whenever desired, ASFOSIL-GY film can be removed easily by wiping it with cloth soaked in kerosene or M.T.O., or dipping the parts in these solvents.

Notes:

1. ASFOSIL-GY must be stored and used in a well-ventilated area away from flames.

2. Shelf-life of ASFOSIL-GY in sealed containers is 6 months from date of manufacture.

3. M.S. containers with lids must be used for dipping application. The lids should always be kept tightly closed, when not in use.

Packings : 5 litres, 30 litres & 205 litres.

Additional Information:

• Item Code: ASFOSIL-GY
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 1 TON AT A TIME
• Delivery Time: 2-3 days
• Packaging Details: As per Specification