|Unit Pack Size (litres)||5,30 LIT|
ASFOSIL-DW-80 is a clear transparent fluid containing solvents, water-displacing additives and rust inhibitors. It has the unique property of displacing water and moisture completely from the metal surface with a micro-fine rust-inhibiting film to give protection for a few days. It gives a dry type clear film less than a micron in thickness. Dewatering type rust preventive. Parts treated with ASFOSIL-DW80 can easily be spot welded.
It is mainly used for displacing water from parts and components after water washing or water rinsing to give temporary protection. It is used to give temporary indoor protection for parts in process, assembly or fabrication. ASFOSIL-DW80 is also used in ultrasonic cleaning machines to clean parts and components after assembly to remove finger prints, moisture, dirt, etc.
ASFOSIL-DW80 is to be used as supplied without dilution by dip, spray, brush, wipe or swab, at room temperature. Best dewatering properties are obtained by dipping parts for 2-5 minutes. ASFOSIL-DW80 can also be circulated through empty fuel tanks and pipelines to displace water and moisture and give temporary protection.
Note: It is absolutely necessary that parts be completely clean and free from rust, scale, grease, oil, etc. prior to application.
ASFOSIL-DW80 must be used and stored in a well-ventilated, cool, dry place, away from open flames.
M.S. or plastic containers having lids may be used. The lids should be kept covered when not in use.
Parts applied with ASFOSIL-DW80 may then be dipped in our ASFOSIL-SL or ASFOSIL-30B or ASFOSIL-33 (depending on the type of film desired) for longer protection.
PACKING: 5 Litres, 30 Litres 205 Litres.
|Minimum Order Quantity||5 Unit|
ASFOSIL-MS is a solvent based rust preventive containing resins, rust inhibitors and organic additives. It produces a golden yellow film coating about 5 microns in thickness and gives indoor protection for about 10 months.
ASFOSIL-MS is used for temporary protection of ferrous and non-ferrous parts. It is generally used for protection of non-moving parts and components. It is also applied on chrome or nickel plated surfaces specially during monsoon to prevent rust.
ASFOSIL-MS can be applied by dip, spray, brush or swab. It is to be used as supplied without any thinning or dilution at room temperature. Once applied, it usually dries within 10 minutes. Drying should be carried out in open dry and well-ventilated areas. Parts should be handled with care during drying to prevent damage to film. Packing of parts should be done only after the film has completely dried.
Parts should be free from oil, grease, rust, scales, etc. before applying ASFOSIL-MS.
ASFOSIL-MSmay be removed with solvents such as Xylene, Toluene, Naptha, M.T.O. etc.
ASFOSIL-MS must be stored and used in dry, well-ventilated areas always from naked flames.
Shelf life of ASFOSIL-MS in sealed containers is 6 months from date of manufacture.
Metal containers with lids should be used for dipping applications. The lids and containers should be kept tightly closed when not in use.
If due to evaporation of solvent, ASFOSIL-MS has become viscous, then thinning should be done by adding ASFOSIL-TH.
Cleaning of spray nozzles, tanks, etc. should be done using xylene, toluene, Naptha or ASFOSIL-TH.
PACKING : 5 Lits., 30 Lits. 205 Lits.
Explore More Products